How to Connect and Pair Skullcandy Earbuds With Any Device

Suraj Giri

By , Founder & Publisher. Reviewed by Suraj Giri on .

Published · 4 min read

How this page was made
  • Sources. Checked against 12 official pages from Skullcandy and Google, most recently on . See the sources.
  • No device testing. We don't test fixes on physical devices, so nothing on this page is a hands-on result. A fact counts as verified only when it matches an official source page.
  • AI use. As with every page on Gadget247News, AI tools helped research, outline, draft and edit this page, and re-read the official pages to flag facts that didn't match. The illustration at the top was generated with Runway and is labelled under the image.
  • Human sign-off. Suraj Giri, Founder & Publisher, read this page and signed it off on . The site won't publish a page without that sign-off.
  • Changes. The published and updated dates move only when the content changes, and every change gets a dated note. Spot an error or a fix that didn't work? Email info@gadget247news.com.

Read our AI use policy, editorial policy and corrections policy.

Skullcandy earbuds pair with a phone, tablet or laptop in one flow: take both earbuds out of the case, wait for "Ready to pair", then pick the name in the Bluetooth list. Skullcandy says that works "for most Skullcandy true wireless earbuds". It's part of Skullcandy earbuds problems and fixes; for other brands, see how to pair Bluetooth earbuds with an iPhone.

An open earbuds charging case beside a smartphone and a tablet on a coffee table, the devices earbuds can pair with.
Earbuds, a phone and a tablet on a living room table. Illustration: Gadget247News, generated with Runway

How to Connect Skullcandy Earbuds

To connect Skullcandy earbuds, take both earbuds out of the case, then select the plain product name in your device's Bluetooth list. Skullcandy's Dime 3 and Rail ANC pages list four steps:

  1. Take both earbuds out of the case. You hear a tone, a battery prompt and then "Ready to pair", and the earbud lights pulse red and blue.
  2. Turn on Bluetooth on your device and open its list of available devices.
  3. Select the plain product name, such as "Dime 3" or "Rail ANC", not an entry ending in "-LE".
  4. Accept the "Pair" or "OK" prompt; a voice prompt says "Connected."

Syncing Skullcandy earbuds means this same pairing, and Skullcandy's pages use "sync" for it too. For a new phone, disconnect them on the old device: Rail ANC and Push Active then enter pairing mode by themselves.

Four steps to pair Skullcandy Dime 3 or Rail ANC earbuds: take both earbuds out of the case, wait for Ready to pair as the lights pulse red and blue, select the plain product name rather than an entry ending in -LE, then accept Pair or OK and hear Connected.
The four pairing steps from Skullcandy's Dime 3 and Rail ANC Product Help pages. Diagram: Gadget247News

Pairing Mode by Skullcandy Model

On the earbuds, the first pairing starts from the case; each model's Product Help page gives its own press for pairing a new device later:

Model First time Pairing mode later How you know
Dime 3 Take both earbuds out Hold the button (on the Skullcandy logo) on either earbud for 3 seconds "Ready to Pair", red/blue pulse
Rail ANC Take both earbuds out Hold the touch sensor on either earbud for 3 seconds "Ready to pair", red/blue pulse
Method 360 ANC In the case until the lights turn yellow or white, then out Hold either earbud for 3 seconds "Ready to pair", both pulse blue
Push Active Pairs in the open case, or close the lid 5 seconds, then take them out Press either earbud button once, then hold it for 1 second "Ready to Pair", red/blue pulse
Indy Evo, Sesh Evo In the case until both lights show red, then out No hold time given Only the left earbud flashes red/blue
Crusher ANC 2 (headphones) Hold the power button for 1 second Press the power button once, then hold it for 1 second "Ready to Pair", red/blue pulse
Crusher Evo, Hesh Evo (headphones) Button combination (next section) Same combination "pairing" prompt

The 3-second hold here belongs to Dime 3, Rail ANC and Method 360 ANC only.

How to Pair Skullcandy Headphones

Skullcandy headphones start pairing mode from their buttons. Crusher ANC 2 says "Ready to Pair" after a 1-second hold of the power button; when it's off, a 6-second hold goes straight into pairing mode. Crusher Evo and Hesh Evo pair again through a full reset: remove them from your phone's Bluetooth list, then hold the top and bottom buttons for 2 seconds (Crusher Evo) or the main button and volume down for 3 seconds (Hesh Evo) until you hear "pairing". On Android, tap "+ Pair New Device".

Connect Skullcandy Earbuds to Your Device

Skullcandy earbuds connect to phones, tablets, laptops and computers; only the Bluetooth menu changes:

Device What changes Guide
Android Tap Pair new device in Bluetooth settings How to Connect Skullcandy Earbuds to Android
Windows PC Windows Bluetooth menus How to Connect Skullcandy Earbuds to a Windows PC
iPhone or iPad Tap the gray gear "Settings" icon, then "Bluetooth" Steps above
Mac or other laptop Pair from its Bluetooth settings Steps above
Game console Switch: yes. Xbox One, PS4: no (Dime 3: PS4/5 only with a separate Bluetooth transmitter) connect Bluetooth headphones to a PS5

Do You Need the Skullcandy App?

No. Skullcandy says to "first successfully pair your app-compatible Skullcandy product to your phone". Indy Evo, Rail ANC, Method 360 ANC, Push Active, Crusher Evo and Crusher ANC 2 work with the app; Dime 3, Sesh Evo and Hesh Evo don't. It has no PC, iPad or MacBook support.

How to Check Your Skullcandy Earbuds Are Connected

Three signs show your Skullcandy earbuds are connected:

  1. You hear the "Connected" voice prompt (Dime 3, Rail ANC).
  2. The product name sits in your paired devices list (Indy Evo's page says it appears there twice).
  3. A podcast or song plays through the earbuds, which Skullcandy says means "you are successfully connected to your phone".

If Your Skullcandy Earbuds Won't Connect

No "Ready to pair", one earbud joining alone, or earbuds not pairing together all point to Skullcandy earbuds not connecting, which follows Skullcandy's order: re-sync first, reset last. If the name is listed but silent, check if your earbuds are paired or connected. For drops after connecting, see Skullcandy earbuds keep disconnecting.

Connecting Skullcandy Earbuds: Quick Answers

How do I put Skullcandy earbuds in pairing mode?

Take both earbuds out of the case for the first pairing. Later, hold either earbud's button (Dime 3) or touch sensor (Rail ANC) for 3 seconds, or hold either earbud for 3 seconds (Method 360 ANC). Push Active takes one press, then a 1-second hold.

Why do I see my Skullcandy earbuds twice in Bluetooth?

One entry ends in "-LE", which Skullcandy calls "a secondary connection for Tile™ services" that "will not allow for audio and calls". Pick the plain name with the small headphone icon, such as "Sesh Evo" rather than "Sesh Evo-LE".

Can I connect Skullcandy earbuds to two devices at once?

Yes, on Multipoint models such as Dime 3, Rail ANC and Method 360 ANC: enter pairing mode while connected and pair the second device. On Dime 3 and Rail ANC, a third device disconnects the first one paired, and only one device plays at a time. See other earbuds that connect to two devices at once.

Sources

We checked this page against the pages below, most recently on . How we verify fixes

  1. DIME® 3 (Skullcandy Product Help) (Skullcandy, skullcandy.com)Official
  2. RAIL® ANC (Skullcandy Product Help) (Skullcandy, skullcandy.com)Official
  3. METHOD 360 ANC (Skullcandy Product Help) (Skullcandy, skullcandy.com)Official
  4. PUSH® ACTIVE (Skullcandy Product Help) (Skullcandy, skullcandy.com)Official
  5. INDY™ EVO (Skullcandy Product Help) (Skullcandy, skullcandy.com)Official
  6. SESH® EVO (Skullcandy Product Help) (Skullcandy, skullcandy.com)Official
  7. CRUSHER® ANC 2 (Skullcandy Product Help) (Skullcandy, skullcandy.com)Official
  8. CRUSHER® EVO (Skullcandy Product Help) (Skullcandy, skullcandy.com)Official
  9. HESH® EVO (Skullcandy Product Help) (Skullcandy, skullcandy.com)Official
  10. SKULLCANDY APP (Skullcandy Product Help) (Skullcandy, skullcandy.com)Official
  11. Why Won't My Skullcandy Earbuds Pair? (Skullcandy) (Skullcandy, skullcandy.com)Official
  12. Find & set up Bluetooth devices near your Android device (Android Help) (Google, support.google.com)Official